Knowledge Base:  
You are here: Knowledge Base > 924/944/968
Odometer Gear Replacement - late 944
Last Updated: 11/22/2010
Author: Skip

Instructions:

  1. Remove 9 screws holding front/back together:
  2. Remove 4 screws holding speedometer in housing:
  3. Gently pull off speedometer needle and remove 2 screws holding face on:
  4. Remove 4 screws hold halves of speedometer together:
  5. Picture of two halves separated.  Brown gear on the right is the one we want to get out:
  6. Using a paperclip, push out pin holding in gear:
  7. Remove e-clips holding next 2 gears in place:

    (
    Be sure to clean the broken gear debris out of the good gears or they may bind)
  8. Reuse e-clips to hold gears in place:

    (Be sure to clean new gear also.  It may have manufacturing residue left on it)
  9. New gear in place and speedometer re-assembled:
  10. Be sure to get trip reset plunger into solenoid:
  11. Install the rest of the screws and job is complete:

Parts: 944 Odometer Gear, KLA_944ODO

Click here to find this part online

Applications: 85.5-89 944, 944S, 944S2, 944 Turbo

Credits: KLA Industries



Was this article helpful?

Comments:
 

Related Articles
 > Window Express Kit Installation
 > AC Delete
 > Accusump Installation
 > Adjustable Ride Height Kit - Paragon
 > Alternator Replacement
 > Brakes, front - 924S, 944, 944S
 > Brey-Krause Strut Brace Installation - 944
 > Camber Plate Installation (Paragon)
 > Clock/Bulb Replacement, digital, Late 944 and 968
 > Clutch Replacement - Part One
 > Clutch Replacement - Part Two
 > Clutch Slave Bleeder Valve Remote
 > Control Arm Bushing Upgrade - Weltmeister
 > Control Arm, Front - Info
 > Coolant Flush
 > DME Chip Installation
 > Dash Replacement
 > Engine Identification
 > Engine Production
 > Fuel Level Sender
 > KLA Strut Brace Installation - 924S, 944, 968
 > Koni Strut Conversion - 8641-1414S for late 944, 968
 > Motor Mount Replacement
 > Oil Cooling, Auxiliary
 > Oil Pressure Relief Valve
 > Oil Pressure Sending Unit Replacement
 > Rear Ride Height Adjustment
 > Porsche Chronology
 > Rear Spring Rates vs. Effective Rates
 > Rear Wheel Bearing Diagnosis
 > Rear Wheel Bearing Replacement - 924, early 944
 > Rear Wheel Bearing Replacement - late 944, 968
 > Ride Height Measurement
 > Rod Bearing Replacement
 > Shift Lever Rebuild
 > Short Shift Kit
 > Throttle Position Sensor
 > Sway Bars - Info
 > Torque Tube Rebuild
 > Torsion Bar Replacement
 > Transaxle Fluid - Info
 > Transaxle Fluid Change
 > Rear Sway Bar Installation
 > Transaxle Replacement
 > Heater Clip
 > Window Regulator Replacement
 > Seat Back Brace Installation Instructions
 > KLA Strut Brace Installation - 968/944 S2/944 S