 |
 |
 |
|
Available in Black, Blue or Red
944s are plagued with vacuum leaks. Especially the 944 Turbo. The factory system is aging and in need of replacement. The original rubber Ts and connectors weather crack, dry out, swell and become loose, leak and even pop off. On the 944 Turbo, this can be a serious issue. If you have a vacuum leak on the fuel pressure regulator, this can cause a severe lean issue under boost doing engine damage. If you have a vacuum leak to your bypass valve, this can cause a slow boosting car with a loss in total boost as well.
Factory replacement hoses and connectors can run over $200.00. Looking for a less expensive alternative? You bet you are!
These kits contain 25 feet of 5/32" Silicone tubing (-65º F to 350º F maximum operating range) and metal "T"s. Enough hose and fittings to replace all the hard plastic lines in your engine compartment.
|
|
|
|
|
|
|
|
|
