Paragon Products - Porsche Parts & Accessories - Koni, Sparco, Pagid, K&N, Bilstein, Weltmeister

Catalog

Stores

Free Live Chat Software

>>Model Help<<

Paragon Products, Inc
5602 Old Brownsville Rd
Corpus Christi, TX 78417

sales 1-800-200-9366
tech 1-361-289-8834
fax 1-361-289-5682

Click to Email

Home > Lubes and Fluids > Other >

Redline - Moly Grease, CV-2

List Price: $14.95
Our Price: $10.95
You Save $4.00!

Product Code: RLCV2

Qty:

Description

Excellent for wheel bearings and CV Joints. 14 oz tube

Red Line CV-2 Grease is designed to withstand the extreme temperatures and pressures which occur in high-performance wheel bearings and CV-joints. The excellent high-temperature stability, extreme- pressure protection, and water resistance enables it to out-perform even the best conventional or synthetic greases. Red Line CV-2 Grease can be used in a wide range of applications at temperatures ranging between -100�F to 500�F and provides good oxidation and corrosion resistance, low evaporation and oil separation, and has a minimum effect on rubber seals. The exceptional extreme- pressure performance and the fluidity of the synthetic oil allows increases in bearing life of 200% to 800%. Red Line CV-2 Grease contains a red moly compound which is a superior lubricant to black moly disulfide lubricants.

Red Line CV-2 Grease may also be used in industrial applications such as high-temperature alternator bearings, high-speed ball bearings, conveyor bearings, worm gear drives, servo mechanisms, and applications where vibrations can cause fretting wear and corrosion to take place.

Red Line CV-2 Grease will retain its consistency and extreme-pressure performance under high- temperature and high-shear conditions for extended periods, which extends the performance ranges of the lubricated components. Red Line CV-2 will darken after high-temperature use; this darkening will not detrimentally effect the performance of the grease. Although Red Line CV-2 is compatible with small amounts of many petroleum-based greases, it is always good lubrication practice to thoroughly clean out the old grease to eliminate abrasive particles and to minimize the possibility of grease incompatibility.