Home > Quick Links > PAGID RACE PADS >

Pagid Race Pad Set - U2707

Pagid 2707


 


Product Code: U2707-PAGID


Pagid Track Pads*:


Optional Accessories*:
Ate Super Gold RBF - liter - (SHIPS VIA GROUND) [Add $1.00]
Motul 600 RBF - 500ml - (SHIPS VIA GROUND) [Add $1.00]
No, Thanks

0:  
Description Additional Information
 
Fits Front: 996 GT3 02-on, GT3 Cup 02-on, GT2 02-on; Carrera GT; 997 Turbo; 997 GT3; 997 GT3RS Fits Rear: Carrera GT

SPECIAL -
Each axle set of Pagid Race or t pads you can add one liter of ATE TYP200 or a 500ml Motul 600 brake fluid for a $1. If you prefer you can choose no brake fluid at all.

We fielded enough phone calls regarding these pads until we finally woke up to the reality that we needed them! Users were unanimous in their praise for Pagid's incredible stopping power, consistency, long pad life and lack of serious dust or squeal. Are they expensive, you bet, but when you add up all their qualities, they may be the biggest bargain in braking. Ask anyone who has tried them and you'll be eager to try a set. It's no wonder Porsche equips all of their factory race cars with Pagid, should your car be any different?

Features
  • Pagid "S" or "Sport" - This is a high performance compound with good fading characteristics and high cold friction. The most comfortable medium friction sport compound. The Sport Pad is street legal, rotor friendly and OE on various Ferraris and Corvettes. PAGID "S" Brake Pads are dipped in a anti-corrosion blue paint, with a layer also on the friction surface. This paint coating will disintegrate during the first braking applications without any loss of friction compared to our other non-coated compounds. In addition a majority of the "S" Line come with anti-noise shims. The "S" compound is the PAGID RS 4-2-1.

    RS-5

  • RS-14-Black - This is a high friction value ceramic compound with very good modulation, high fade resistance, low heat conductivity, and a good wear rate up to a constant temperature of 650 degrees Celsius (1202 degrees Fahrenheit). It is kind on discs, (with visible grooving, but no tendency to crack discs). Applications: Super Touring, WSC, Trans Am, and Rallye.

  • RS-15 Gray - Very high torque compound. It combines a 20% higher friction value than the RS14 with a slightly increased pad wear. Needs finesse to avoid over braking the car. Good release characteristic. Although the RS15 has a very good modulation (controllability) it might have an excessive bite for some applications, as lightweight cars or cars with boosted brakes.

  • RS-19 Yellow - Best compound for endurance racing on the basis of the RS 14. A slight reduction of the friction value improves the modulation (controllability). Nevertheless, the friction value is enough for cars without power-assisted brake system and ensures comfortable low effort on the brake pedal. Constant temperatures up to 600°C (1.100°F) are possible. The combination of friction value, fading stability and low wear rates on pads and discs (rotors) realized with this pad compound is unmatched up to now. Due to its outstanding wear rate and driveability PAGID endurance materials are often used at sprint races as well. A multiple winner of Daytona 24h, Le Mans 24h, Sebring 12h, Spa 24 h, Nürburgring 24h, often with no pad change and usually no disc (rotor) change.

  • RS-29 Yellow - New endurance compound. This compound combines the outstanding wear rate of the RS19 with a slightly higher coefficient of friction and initial bite. Due to its outstanding wear rate and driveability PAGID endurance materials are often used at sprint races as well.

  • RS-44-Orange - This compound has a very good fade resistance and a higher average friction value than the RS 4-2. It is rotor friendly with a very foreseeable non-aggressive friction behavior (stable torque). It is a very good rear compound for Touring Car applications in combination with RS 14 front pads. It’s main application is Porsche 911 racing. It is used on either Short Track or Long Distance; also for front and rear axles.

    RSC 1: Sprint race and track day compound for Porsche ceramic brake discs. This friction material gives you the ideal combination of cold friction performance, fade resistance and low thermal oxidation of the brake disc surface fibers.

    RSC 3: RSC 3 is a special race compound for ceramic discs with low fiber content in the friction surface. This pad exhibits excellent fade resistance, low wear and very high friction level.


Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Quick Links > PAGID RACE PADS
911 > 911 - 996 & 997 1999-2012 > Brake > Brake Pads
911 > 911 - 996 & 997 1999-2012 > Brake
911 > 911 - 996 & 997 1999-2012
911
Quick Links