Knowledge Base:  

You are here: Knowledge Base : ENGINEERING
Page of 1
Tarett Engineering Rear Sway Bar Installation Instructions
REAR SWAY BAR ASSEMBLY INSTRUCTIONS 1) Tarett Engineering rear sway bars are designed to mount directly to the factory mounting brackets on 1965-89 911’s, 912’s & 930’s. Any cars without factory m
DME Chip Installation
Author: Skip Location: 924S - located under the steering column - remove the four 8mm nuts holding it in. 85.5-91 944, 968 - located in the passenger-side foot well, behind the carp
Ask Dr. Koni
Author: Skip   Question: What's the difference between the red Koni and the Sport Yellow Koni? Answer: The valving is different. Sport Yellow units have stiffer valving than their St
K&N Air Filter Facts
Author: Skip Why K&N Makes The World's Best Air Filters Facts You Should Know About Air Filters Paper vs K&N Stock Replacement Filters Washable and Reusable Beyo
Oil Cooling, Auxiliary
  KISS ENGINEERING OIL COOLER KITS 944/944 TURBO TEST DATA AND INFORMATION     COOLER           &n
RennShift 901 and 915 Installation Instructions (911 and 914 cars)
K&N Air Filter Care K&N Air Filter Care
Author: Skip You Can Feel the Power in the Air! 1. PRE-CLEANING Tap the element to dislodge any lodge embedded dirt, then gently brush with a soft bristle brush. (Note: If
1 - Weight Transfer
  Most autocrossers and race drivers learn early in their careers the importance of balancing a car. Learning to do it consistently and automatically is one essential part of becoming a truly
6 - Speed and Horsepower
The title of this month's article consists of two words dear to every racer's heart. This month, we do some "back of the envelope" calculations to investigate the basic physics of speed and horsepowe