Knowledge Base:  

You are here: Knowledge Base : KLA
Page of 1
KLA Boxster Top Fix
Author: Skip Boxster Lift Rod End Replacement Instructions: Raise the tonneau cover to an upright position.     This will be just before the top starts to pull back.
KLA Strut Brace Installation - 924S, 944, 968
944 STRUT BRACE INSTALL 1) Remove 4 nuts holding strut assembly to the body. 2) Place bracket over studs with bracket upright toward front of car.
KLA Strut Brace Installation - 911
Author: Skip Installation : Remove front strut bolt and rear inner strut bolt. Place bracket, long leg of bracket toward front of car, over holes and replace bolts. Tighten to about
KLA Strut Brace Installation - 964/993
Author: Skip  KLA Strut Brace for 964/993 Installation: Remove 3 nuts holding strut assembly to the body.  2 nuts toward front of car.  1 rear/inner nut. Place bracket over studs with
KLA Strut Brace Installation - 968/944 S2/944 S
1) Remove 4 nuts holding strut assembly to the body. 2) Place bracket over studs with bracket upright toward rear of car. 3) Replace washers and nuts.&
Sway Bar Calculations
Author: Skip Provided by KLA Industries to answer the question of how the drop-link length affects the rate of a sway bar. Here is the angle of the dangle formulas for calculating the ch
Odometer Gear Replacement - late 944
Author: Skip Instructions : Remove 9 screws holding front/back together: Remove 4 screws holding speedometer in housing: Gently pull off speedometer needle and remove 2 screws holdi