You are here: Home > 914 > Driveshaft & Axle
Porsche 914 Driveshaft & Axle Parts incl. Drive Shaft Kit, Bearing Kit, Axle Assembly, Castle Nut, CV Boot Kit, CV Joint Bolt, CV Joint Kit, Driveshaft Coupler Bolt, Lug Nut, Grease, Bearing, Wheel Seal, Wheel Stud, Wheel Seal & Wheel Hub. Lobro & OEM
Sort By:
Page of 1
CV Boot

Fits 911 65-68, 912 66-68, 914

Our Price: $3.95
CV Boot with Flange

Fits 914/4 70-76

Our Price: $5.98
CV Joint Bolt

Fits Porsche 914 1970, 1971, 1972, 1973, 1974, 1975 and 1976
- Porsche 924 1976, 1977, 1978, 1979, 1980, 1981 and 1982
- Porsche 944, 944S, 944 Turbo, 944S2 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990 and 1991
- Porsche 968 1992, 1993, 1994 and 1995

Our Price: $0.95
GKN - High Performance Grease - 275g

Lobo/GKN Recommended Grease for CV Joints

Our Price: $46.69 UPS Ground or 3 Day Shipping Only
Lug Nut - Alloy

Our original equipment Alloy Lug Nuts will replace your factory supplied nuts and solve galling problems that are prone to occur. If your alloy lug nuts "pop" and "crack" when you try to remove them, it's time for replacement.

Fits
- Porsche 911 1965-1998
- Porsche 914-6/924/928/944/968 All

Our Price: $8.09
Porsche Steel Lug Nut Lug Nut - Steel

Fits
- Porsche 911 1965-1998
- Porsche 914-6/924/928/944/968 All

Rear Wheel Bearing-SKF (42 X 80 X 42 mm)

Fits rear 964 C2/4 89-94

Our Price: $64.41
Redline - Moly Grease, CV-2

Excellent for wheel bearings and CV Joints.  14 oz tube

Our Price: $13.65 UPS Ground or 3 Day Shipping Only
Swepco - Moly Grease, 101

Excellent for wheel bearings and CV Joints.  14 oz tube

Our Price: $11.95 UPS Ground or 3 Day Shipping Only
Wheel Bearing - front, inner

Fits Porsche 356SC 1964 and  1965
- Porsche 911 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 and 1989
- Porsche 912 1965, 1966, 1967, 1968 and 1969
- Porsche 914/6 1970 and 1971
- Porsche 924 1977, 1978, 1979, 1980, 1981 and 1982
- Porsche 924S 1987 and 1988
- Porsche 944 1983, 1984, 1985 and 1986
- Porsche 944 Turbo 1986

List Price: $12.95
Our Price: $11.31
You save $1.64!
Wheel Bearing - front, outer

Fits Porsche 356SC 1964 and 1965
- Porsche 911 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988 and 1989
- Porsche 912 1965, 1966, 1967, 1968 and 1969
- Porsche 914/6 1970 and 1971
- Porsche 924 1977, 1978, 1979, 1980, 1981 and 1982
- Porsche 924S 1987 and 1988
- Porsche 944 1983, 1984, 1985 and 1986
- Porsche 944 Turbo 1986

List Price: $13.85
Our Price: $8.36
You save $5.49!
477.405.641 Wheel Bearing - front, seal

Fits
- Porsche 356C/SC 1964-1965
- Porsche 911 1965-1989
- Porsche 912 1965-1969
- Porsche 914-6/924/924S/928/944/968 All

List Price: $11.92
Our Price: $5.30
You save $6.62!
Wheel Bearing Kit- 944 Early, 914-6, 356C & 911 Front

Fits
- Porsche 356C All
- Porsche 911 1965-1989
- Porsche 912 1965-1969
- Porsche 914/6 All
- Porsche 924 Turbo All
- Porsche 924S All
- Porsche 944 1983-1986
- Porsche 944 Turbo 1986

Our Price: $40.00
Wheel Bearing-FAG (42 X 75 X 37 mm)

Fits rear 911 69-73, 912 69, 914 all

If one of your rear wheel bearings goes bad, good chance the other one is not too far behind. Plus, think of it this way, doing the second bearing will only take half as long

Our Price: $37.77
Wheel Bearing-SKF

Fits rear 911 69-73, 912 69, 914 all

Our Price: $87.73