Home > 944 85.5 & Up (Late) and 968 > Suspension > Control Arms >

Control Arm Set - Racers Edge Billet 7075T6

Racers Edge MC-2000 Control Arm Set
One Arm Shown, Priced per pair
  
Our Price: $1,758.60


Product Code: RE_MC-2000
Qty:

Description
 
These Racers Edge Racing Control arms are designed to maintain stock geometry for those who are club racing in stock classes.  The ball joint "pin" itself is actually made up of 2 parts, the main part of which threads into the spindle.  Since it is threaded it can then be tensioned via the bottom nut (the one under the bearing.)  The energy can be stored in this member, which results in a much stronger joint and much less likelihood of failure.  The outer pin diameter is approx .75" so it is the largest available on the market today.
The front pick up comes with a spherical bearing so there is no need for additional kits.  It works with the factory eccentric at the rear, which is of course compatible with the factory Caster block or other aftermarket caster blocks.
The arm itself is made out of billet 7075 T6 aluminum and is much stronger than the factory arms.
The outer spherical and the front spherical use a high quality Teflon lined, aerospace grade bearing which never need oil.

Fits
- Porsche 944 1987-1989
- Porsche 944S 1987-1988
- Porsche 944S2 1989-1991
- Porsche 944 Turbo 1987-1991
- Porsche 968 1992-1995

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

944 85.5 & Up (Late) and 968 > Suspension > Control Arms
944 85.5 & Up (Late) and 968 > Suspension
944 85.5 & Up (Late) and 968


Voltage Regulator - Bosch $52.50
Clutch Alignment Tool $7.95
Porsche 964 Cup Car Decal $2.00
Spark Plug $12.17
Door Handle Parts
Shock Spherical Bearing Step Down Spacer $10.00
Ignition Wire Set $43.78
Wiper Blade - 13"