Pagid pads USED successfully at three major endurance races
Pagid pads USED successfully at three major
endurance races
24 Hr Race Le Mans
(France)
Pagid’s stopping
power and longevity pay of at the 2011 Le Mans 24h rac |
PAGID race pad mounting and bedding in
Author: Pagid
PAGID race pad mounting and bedding in
MOUNTING NEW PADS ON USED DISCS (rotors)
We do not recommend using discs, which are pre-bedded, or have b |
PBR-Brake Pads - Metal Master vs. Ultimate
Author: Skip
Ultimate is a high performance brake pad and offers the highest level of braking performance in terms of reduced stopping distances, excellent pedal feel and resistance to h |
Porsche Chronology
Some model history that may help with shopping our site
Model
Year
Engine
Note
356
55-65
911
65-69
2.0
|
Porsche Option Codes
Author: Skip
Code
Description
009
3 speed sportomatic transmission
018
Sport steering wheel with elevated hub
020
Speedometer with 2 scales KPH/MPH
024
Version for |
Porsche Reference Material
Author: Skip
Click the "buy now" links to visit the Paragon Bookstore
Parts and Tech Ref Catalogs:
Genuine Porsche Parts
Catalog CD
buy now
Porsche:
Excell |
Portable air tank tips
Author: Skip
Go ahead and laugh, but if this helps just one person...
Many of us have the small portable air tanks for various tasks, most for quick racing tire pressure changes. Frustrated |
Rear Ride Height Adjustment
Porsche 924/944/968 rear ride height can be lowered (in most cases) by approximately ¾" using the following procedure. This adjustment was originally designed for factory ride height settings across t |
Rear Spring Rates vs. Effective Rates
An effective spring rate is the value when taking into consideration the placement, construction, and type of the sprung materials.
Torsion bar diameter is expressed as the effective diameter. |
Rear Sway Bar Installation
This procedure is specifically for the installation of a 968 M030 Sway Bar but also applies to any 924/944/968 factory sway bar.
The best (easiest) way to remove or install the sway bar is with t |
Rear Wheel Bearing Diagnosis
Diagnosis: Name that tune... 'wuh wuh wuh wuh', as you go around a corner? Rhythmic rubbing sounds from the rear of the car, especially during cornering, is usually the |
Rear Wheel Bearing Replacement - 924, early 944
Parts needed:Rear Wheel Bearing KitStub Axel Nut/Rear Wheel Bearing NutMoly GreaseProcedure:
Lift rear or entire vehicle SAFELY!
Release handbrake
Remove the rear wheels.
Remove the rea |
Rear Wheel Bearing Replacement - late 944, 968
Discussion:
This procedure will describe the removal and subsequent installation of rear wheel bearings on a Porsche 944 with aluminum trailing arms (1985.5 & later). |
Record success for PAGID RACING in 2015
Many thanks to all who contributed to our record North
American racing results for 2015.
It is always gratifying to have the |
RennShift 901 and 915 Installation Instructions (911 and 914 cars)
|
Ride Height Measurement
Torsion Bar Indexing 101
The outside has 44 splines (teeth)
Every tooth you move the outside splines you move the spring plate about 9 degrees.
The inside has 40 splines (teeth)
Every tooth |
Rod Bearing Replacement
Discussion:
This procedure will detail the steps necessary to replace the Rod Bearings on a 944 Turbo car. With some modifications it may also be applied to normally aspirated 944 cars |
Seat Back Brace Installation Instructions
Seat Back Brace Installation Instructions To Order the I/O Port Seat Back Brace SBB-15 Click Here.Determine where on the seat back the mount needs to be to have the 1½” tubing within ±20° from horizon |
Shift Lever Rebuild
This is an alternate procedure This article is an alternate procedure for overhauling the shift lever. Normally, replacement of parts with new would be ideal. The parts needed |
Short Shift Kit
Procedure:
Raise care on lift or place on jack stands. Make sure car is safely and securely supported, and you have plenty of room to see around the transaxle.
Locate the shifter |
