A-arm bushing modification (65-68 911/912)
Author: Skip Discussion:During various parts of my '66 912 restoration/rebuild/upgrade project, I've come up against the curse of old car restorers-parts! Yes, I know, Porsches are actually one o |
Brey Krause Deep Sump Oil Pan Spacer Kit for
Porsche 996, Boxster, Boxster S
Please follow our link for more information and purchasing the R-9095 Deep Sump Oil Pan Spacer Kit
|
Front Shock Replacement (65-89)
Author: Skip The 911, 914 and some 944’s featured a rebuildable front McPherson Strut. Instead of having to replace the entire strut unit, you will be able to merely replace the strut insert that |
Front Torsion Bars (65-89)
Author: Skip
Jack up the car and remove the front wheels. Remove the tow hooks that secure the front of the A-arm and torsion bars if your car is so equipped. Use the 17mm socket on two bolts |
Gate Shift Installation
Author: Skip
The following is a brief overview of the installation process for 901/915 transaxles. 901 users must obtain a 915 shift housing. Complete instructions are included with the ki |
KLA Strut Brace Installation - 911
Author: Skip
Installation:
Remove front strut bolt and rear inner strut bolt.
Place bracket, long leg of bracket toward front of car, over holes and replace bolts.
Tighten to about 20 ft-lb |
KLA Strut Brace Installation - 964/993
Author: Skip KLA Strut Brace for 964/993Installation:Remove 3 nuts holding strut assembly to the body. 2 nuts toward front of car. 1 rear/inner nut.Place bracket over studs with long |
OXS light reset
OXS light reset < 911 < Main Page
OXS light reset
Author: Skip
For those 911's equipped with the "OXS" warning lamp, you can reset or disable this on your own. Here's how:
- the |
Porsche Chronology
Some model history that may help with shopping our site
Model
Year
Engine
Note
356
55-65
911
65-69
2.0
|
RennShift 901 and 915 Installation Instructions (911 and 914 cars)
|
Seat Back Brace Installation Instructions
Seat Back Brace Installation Instructions To Order the I/O Port Seat Back Brace SBB-15 Click Here.Determine where on the seat back the mount needs to be to have the 1½” tubing within ±20° from horizon |
Tarett Engineering Rear Sway Bar Installation Instructions
REAR SWAY BAR ASSEMBLY INSTRUCTIONS 1) Tarett Engineering rear sway bars are designed to mount directly to the factory mounting brackets on 1965-89 911’s, 912’s & 930’s. Any cars without factory |
Window Express Kit Installation
Window Express Kit Installation Instructions.
Author: Skip
Find the Window Express Right Here.
Introduction
Most modern cars have an aut |
