|
|
You are here: Knowledge Base > 911
|
KLA Strut Brace Installation - 964/993 Last Updated: 07/18/2013 |
|
Author: Skip Installation: Remove 3 nuts holding strut assembly to the body. 2 nuts toward front of car. 1 rear/inner nut. Place bracket over studs with long leg of bracket over front 2 studs as in the picture. Replace washers and nuts. Tighten to 18 ft-lbs. Repeat for other side of car. Install bar on brackets and tighten. Hardware order is: bolt/washer/bar/bracket/washer/lockwasher/nut. Length can be adjusted by the ends. Turn bar to take up "slack". Tighten backing nuts. Application: 90-94 911 (964 & 89 C4 only), 95-98 911 (993) Credits: KLA Industries
|